rewrite this title 7 cool and useful things I can do with my Flipper Zero – as someone who's used it for years

The sub-GHz wireless antenna can pick up signals from devices such as wireless doorbells and car key fobs, making the Flipper Zero a handy tool for testing if wireless transmitters are working properly. I use mine to test if the fobs are working and to test their range. 

Also: The best security keys you can buy: Expert tested 

And yes, the Flipper Zero can record the codes transmitted by car key fobs, but retransmitting these codes to a modern car won’t unlock it due to a feature called ‘rolling codes’ that changes the code with each use. On older cars — those 20 years old and more — you could use a code captured to unlock the vehicle (but don’t do that unless it’s your car or you have permission!), but you still couldn’t drive away with it.

On the flip side — pun intended — retransmitting the codes to a wireless doorbell will cause the bell to ring, as most of these systems don’t have a mechanism to protect against such annoyances.

NFC is everywhere nowadays, and the Flipper Zero allows you to work with this wireless protocol. It’s built into plastic cards and fobs and used for all sorts of things, from unlocking hotel room doors to controlling barriers.

But this doesn’t mean you can cause chaos in the world, because to unlock things you more often than not need access to the NFC key. 

NFC signals can be read by the Flipper Zero, and many NFC cards can also be copied and cloned (this depends on the security used for the card, so I can’t give you any hard and fast rules about which NFC devices can be cloned). I’ve used my Flipper Zero to copy my hotel room card on occasion when the hotel only gives you a single card or when we have multiple rooms and don’t want to juggle a handful of cards.

Also: The best VPN services (and how to choose the right one for you)

However, note that while the Flipper Zero can read NFC cards and fobs, it cannot decode the card’s encrypted security code used on credit and debit cards, so they can’t be cloned.

Along with NFC, the Flipper Zero can read and clone RFID cards and fobs, including hotel cards, as shown in the picture above.

Also: I bricked my iPhone to prevent doomscrolling – and accidentally fixed my life

RFID cards and tags can be locked to prevent overwriting or extraction of their security keys, but the Flipper Zero can bypass many of these mechanisms. For example, it can offer to unlock the card if you present it to a valid reader (such as the lock it has been programmed to open). 

This allows you to clone the card and unlock the door using both the card and the Flipper Zero. 

The Flipper Zero has a built-in infrared module that can be programmed to operate a wide range of devices, from TVs to AC units. 

Pretty much any consumer device with an IR remote control interface can be controlled using the Flipper Zero.

Another cool use of this functionality is to test if infrared remote controls are working. Simply point the remote control at the Flipper Zero in ‘read IR’ mode, and it will detect the signals.

I use this feature all the time to test remote controls that I’ve fixed after battery leaks have damaged the device. It’s an incredibly handy feature!

Yes, the Flipper Zero can bypass the security on some Sentry Safe electronic safes using an output from the GPIO. 

This is definitely not something you want to be doing if it isn’t your safe or you don’t have permission, but it goes to show just how insecure the “complimentary” safes found in hotels, spas, and Airbnbs actually are.

Flipper Zero can act as a BadUSB device, which means that when connected to a port it is seen as a Human Interface Device (HID), such as a keyboard. 

Also: The best VPN services for iPhone and iPad (yes, you need to use one)

A BadUSB device can change system settings, open backdoors, retrieve data, initiate reverse shells, or do anything that can be achieved with physical access. These tasks are completed by using a set of commands written in the Rubber Ducky Scripting Language, also known as DuckyScript. 

The Flipper Zero can use the GPIO to output electrical signals and act as a signal generator. I last used this to simulate an antilock braking system module on a vehicle to confirm that all the wiring and computers in the car were working.

The Video Game Module is powered by the RP2040 microcontroller developed by Raspberry Pi and adds a bunch of gaming-related functionality.

First, it adds a DVI video output port to the Flipper Zero, allowing it to send video to external displays. This is essential since the tiny LED panel built into the Flipper Zero isn’t ideal for gaming. This capability isn’t limited to gaming, though. The ability to beam video output to a larger display is great for various other applications, such as testing or training.

Also: Why the most premium charging accessory for iPhone fans isn’t made by Apple

The Video Game Module also includes an IMU (Inertial Measurement Unit) featuring a TDK ICM-42688-P sensor, which adds a 3-axis gyroscope and a 3-axis accelerometer to the package, allowing it to sense tilting or shaking.

If you’re not into gaming, that’s no problem. The RP2040 microcontroller can run applications programmed in C, C++, or MicroPython, making it a versatile addition to the Flipper Zero.